Skyles: Difference between revisions

Latest revision as of 03:18, 16 February 2026

Specific System Requirements – Skyles Flash!

Color 64 automatically detects the presence of the Skyles Flash! 1541 interface and will utilize it when available. The interface is supported only on device 8, so the 1541 drive connected to the Flash! must be configured as device 8.

Due to the storage limitations of a single 1541 disk, not all overlays may fit simultaneously. To accommodate the Program Files on a 1541 disk, you may need to omit certain overlays. This typically means excluding either:

√bbs.ov2 and √bbs.ov3

or

√bbs.nw1 and √bbs.nw2

Adjust overlay selection according to your system requirements and available disk space.

Specific System Requirements

@@ Line 1: / Line 1: @@
-The Color 64 system will automatically detect if you are using the Flash! interface.  The system will only take advantage of the interface on device 8, however.  As such, you will need to make sure the 1541 to be used with the interface is device 8.  To fit all your program files on the 1541 disk, you will have to leave out a couple overlays, either the "√bbs.ov2" and "√bbs.ov3" overlays, or the "√bbs.nw1" or "√bbs.nw2" overlays.
+{{DISPLAYTITLE:Skyles Flash! 1541 Interface}}
+[[Specificsystemrequirements|Specific System Requirements]] – '''Skyles Flash!'''
+Color 64 automatically detects the presence of the Skyles Flash! 1541 interface and will utilize it when available. The interface is supported only on device 8, so the 1541 drive connected to the Flash! must be configured as device 8.
+Due to the storage limitations of a single 1541 disk, not all overlays may fit simultaneously. To accommodate the Program Files on a 1541 disk, you may need to omit certain overlays. This typically means excluding either:
+* √bbs.ov2 and √bbs.ov3
+or
+* √bbs.nw1 and √bbs.nw2
+Adjust overlay selection according to your system requirements and available disk space.
+[[Specificsystemrequirements|Specific System Requirements]]